Polished Stainless Mud Flap Hanger – 30" Angled/Bent with DOT-C2 Reflective Tape – 1-1/8" or 2-1/2" Bolt Pitch (655SS)

Polished stainless angled mud flap hangers — 30" arms with a bent/angled profile that sets the mud flap further out from the frame, plus a red/silver DOT-C2 reflective conspicuity strip along the outer face. Sold as a matched left + right pair.

Choose your bolt pitch before ordering. Each pair is drilled for one pitch — 1-1/8" and 2-1/2" are separate parts and are not interchangeable. Measure the stud spacing on your frame or crossmember first.

Key Features

• Bent/angled arm profile — sets the mud flap further from the tire
• Polished 304 stainless — will not rust or flake the way plating does
• DOT-C2 red/silver reflective conspicuity tape on the outer face
• Single bolt pitch per pair: choose 1-1/8" or 2-1/2"
• Overall length: 30" / 76.2 cm
• Sold as a matched left + right pair

Body Dimensions

• Overall length: 30" / 76.2 cm
• Mounting bolt pitch: 1-1/8" or 2-1/2" — selected above, one per pair
• Profile: Angled / bent arm
• Finish: Polished stainless with DOT-C2 reflective tape
• Revision: R2

What's in the Box

• One matched pair (left + right), in the bolt pitch you selected

Note: Sold as a pair. Confirm your frame or crossmember bolt pitch before ordering — the two pitches are not interchangeable. Light welding or drilling may be required depending on your truck.